Transmission Line Fittings / Power Line Fittings Galvanized Steel Angle Iron

Transmission Line Fittings Galvanized Steel Angle Iron Angle Steel for Power line fittings

Decscription:

galvanized steel cross arm

• The crossarm angle iron is the important part of the tower, its function is used to install the insulator and the hardware to support the wire, overhead ground wire, and to keep a certain safety according to regulations
• according to use Angle steel can be divided into:straight line horizontal crossarm; The corne crossarm; The resistance to a crossarm.
• *The crossarms are used to link clamps to insulator, or to link insulator and ground wire clamp to tower or subjection structure.
• Aerial Line Hardware Galvanized Crossarm V Brace/Angle Iron/Cross Arm For Overhead Line Hardware
• *2. Hot-dip galvanized surface protect the commodities from rusting.

CRUCETA DE REMATE (50x50x4x500mm) (Fe16mm) (65x65x6x508mm) (Fe 16mm) -
CRUCETA DE PASO AT/BT (50x50x4x500mm) (65x65x6x508mm) CRUCETA DE PASO AT/BT (50x50x4x500mm) (65x65x6x508mm)
Technique: precision casting rolling, forging, turning, milling, drilling, hot galvanized,Annual production capacity: 8000 tons
Specifications of the offered materials
1. Tensile Strength (N / square mm):375 N /mm2 up to 510 N/mm2
2. Yield Point (N / square mm):235 N/mm2
3. Zinc Coating Wt (gram / square meter):505
4. Zinc Coating Thickness ( microns ):70

ANGLE SIZES:

• Size(mm)		Theoretic weight (kg/m)	Size(mm)		Theoretic weight (kg/m)
  20*20*3	3	0.885	50*50*4	4	3.06
  25*25*3	3	1.12	50*50*5	5	3.77
  30*30*3	3	1.36	50*50*6	6	4.43
  30*30*4	4	1.78	70*70*5	5	5.37
  30*30*5	5	2.16	70*70*6	6	6.38
  38*38*3	3	1.72	70*70*7	7	7.35
  38*38*4	4	2.26	75*75*5	5	5.76
  40*40*3	3	1.83	75*75*6	6	6.85
  40*40*4	4	2.41	75*75*7	7	7.94
  40*40*5	5	2.95	75*75*8	8	8.92
  50*50*3	3	2.33	75*75*9	9	9.96

DETAILS OF THE PICTURES:

Other material of transmission line fittings like line hardwares link fittings angle iron, angle brace, steel angle strip are available: